Index//Top/Wizards/Options

 << >>

Action Settings

On Start On Exit Experiment Load Experiment Run Experiment Finish Experiment Save
Tune Mode Run Mode Queue Run Queue Finish    
On start

Welcome Screen allows user to select appropriate device and pulse configurations.

Welcome Screen Show welcome screen and let user select configuration.
No configuration Load empty configuration. Mostly useful in viewer mode.
Load last configuration Load configuration used during previous run of SpecMan4EPR.

The list of configuration files as appeared in welcome screen.
On exit Erase sample description option erases the experiment description when program is closed. On default the description is stored in the Configuration file.
Experiment Run

Data format - the format of data that will be chosen after loading of template. If As in Experiment is selected the data format of template will be preserved. The format can be changed later in Special Setup panel of Experiment Editor.

  • Integer format (4 bytes)- highest performance. Requires integer stream support of the device driver.
  • Floating point (4 bytes) - optimum format for most cases.
  • Floating point (8 bytes) - highest data precision. Slowest performance. High memory usage.

RAW format - the default format of RAW file.

  • Standard RAW - the only format implemented. Saves all experiment data except not processed transient data.
Experiment Run

Main and Secondary view state options select the View port visualization in Run mode. If nothing selected the visualization state of view port will not be changed between different experiments.

Show File Select dialog option is under development.
Experiment Run

Save a copy to the first slot of buffer option copy the experiment to the first slot of buffer immediately after the end of experiment. Uncheck this option to save the memory for large experiments.

Copy experiment to memory stores the experiment to memory when experiment is saved. Second option preserves the memory by avoiding experiments with large size.

Save experiment dialog options
Saves a copy of to ASCII format in parallel to SpecMan4EPR data format.
Copy sample description forces the description entered in the dialog into the main experiment description
Trace Length is the length of the trace in the tune mode. In tune mode the length of the trace is not dependent on the dimensions of experiment.
Run Mode Under development.

Show File Select dialog option launches a dialog to set the template file name for the queue.

Add Experiment to Empty Queue option adds experiment to the queue on experiment queue when it is empty.

 
Empty queue after all experiments in the queue are finished.

Index//Top/Wizards/Options

 << >>